Prosilica GB Technical Manual V2.0.3
31
Camera interfaces
Camera I/O connector pin assignment
The General Purpose I/O port uses a 3M 10214-55G3PC (or 3M 10214-6212PC)
connector on the camera side. The mating cable connector is 3M 10114-3000PE
or a connector with shielded housing 3M 10314-3210-00X (X indicates color
preference).
Figure 17: Camera I/O connector pin assignment
Note
The cable side Hirose connector is available for purchase from
AVT.
AVT P/N: 02-7003A
Pin Signal
Direction Level
Description
1
Camera Power In
5–16* VDC
Power supply
2
Camera GND
In
GND for ext. power Ground for camera power
supply
3
In 1
In
U
in
(high) = 5–24 V
U
in
(low) = 0–0.8 V
Input 1 opto-isolated
(SyncIn1)
4
Isolated IO
GND
In/Out
Common GND for
In/Out
Isolated input and output
signal ground
5
Out 1
Out
Open emitter max.
20 mA
Output 1 opto-isolated
(SyncOut1)
6
Video Iris
Out
---
PWM signal for iris control
7
Reserved
---
---
---
8
Camera Power In
5–16* VDC
Power supply
9
Camera GND
Out
GND for ext. power Ground for camera power
supply
10 TxD RS-232
Out
RS-232
Terminal transmit data
11 RxD RS-232
In
RS-232
Terminal receive data
12 In 2
In
LVTTL max. 3.3 V
Input 2 non-isolated
(SyncIn2)
13 Out 2
Out
LVTTL max. 3.3 V
Output 2 non-isolated
(SyncOut2)
14 Signal GND
---
---
Ground for RS-232 and non-
isolated outputs
*Some models offer 5–25 VDC. See
Camera power
section for details.
7
1
14
8