Allied Vision Technologies AVT Manta, Technical Manual

Page: 16 / 91

Specifications
MANTA Technical Manual V4.1.0
16
Specifications
Manta G-032B/C
Note

PoE capable cameras
How can I distinguish between PoE capable cameras and
cameras that are not PoE capable?
PoE capable cameras have the letters PoE written on the
camera’s label on the bottom side of the camera.
Feature Specification
Image device Type 1/3 (diag. 6 mm) progressive scan SONY IT CCD ICX424AL/AQ with
HAD microlens
Effective chip size 4.9 mm x 3.7 mm
Cell size 7.4 μm x 7.4 μm
Picture size (max.) 656 x 492 pixels
Lens mount C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 9.7 mm
(see
Figure 24: Manta C-Mount dimensions on page 51)
CS-Mount: 12.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 5.1 mm
(see
Figure 25: Manta CS-Mount dimensions on page 52)
ADC 12 bit
Pixel format Only b/w: Mono8, Mono12Packed, Mono16
Only color: Bayer8, Bayer12Packed, Bayer16, Mono8, RGB24, YUV411,
YUV422, YUV444, BGR24
Frame rates Up to 80 fps
Gain control Manual: 0-36 dB (1 dB/step); auto gain (select. ROI)
Exposure time 26 μs … 60 s; auto shutter (select. ROI)
Table 3: Specification Manta G-032B/C
Note

Maximum protrusion means the distance from lens flange to
the glass filter in the camera.
Note

Depending on the used viewer: Raw8, Raw16 may be displayed
instead of Bayer8, Bayer16, meaning the same.