Allied Vision Technologies AVT Manta, Technical Manual

Page: 7 / 91

Introduction
MANTA Technical Manual V4.1.0
7
continued from last page
V3.0.0
[continued]
09.06.10
[continued]
[continued]
• With the new firmware 1.40 due to a bug all Manta models
have only 12 bit in the data path (even if the ADC delivers
14 bit): See
Figure 34: Block diagram b/w camera on page
66 and Figure 35: Block diagram color camera on page 66.
• Due to a repaired bug in FPGA and microcontroller, the
StreamHoldCapacity changed: Manta G-032 from 49 frames
to 99 frames, Manta G-125 from 12 frames to 25 frames: see
Chapter
Manta G-032B/C on page 16 and Chapter Manta G-
125B/C on page 23
• RGBA24 and BGRA24 are not supported, see Chapter
Specifications on page 16ff.
• Manta board level cameras have now a cooling plate: see
– Chapter
Manta board level (non PoE): dimensions on
page 53
– Chapter Manta board level: C-Mount on page 54
– Chapter Manta board level: CS-Mount on page 55
– Chapter Manta board level: M12-Mount on page 56
• Added Chapter Firmware update on page 87
V4.0.0 25.10.10 • Added the information, that description of status LEDs can
be found in
Manta Hardware Installation Guide, see Note
on page 57
• Changed file format from FM7 to FM9
Added Manta G-033B/C (sensor: Sony ICX 414) and
Manta G-504B/C (sensor: Sony ICX 655):
• Chapter Manta G-033B/C on page 19
• Chapter Manta G-504B/C on page 31
• Chapter Spectral sensitivity on page 33ff.
• Chapter Camera lenses on page 43
• Table 18: Image memory size (typical; see note above) on
page 75
• Chapter Resolution and ROI frame rates on page 78
• Manta angled head models: Chapter Manta W90 (1 x GigE)
on page 47ff.
to be continued on next page
Version Date Remarks
Table 1: Document history