Installing the camera
69
Alvium USB Cameras User Guide V1.1.0
Installing the camera driver with Windows tools
As alternative practice, you can install the
Vimba
driver manually. Check for
connected USB devices on your Windows system.
Under Windows, the
Device Manager
provides an overview of USB resources and
connected devices. As long as the
Vimba
USB device driver is not installed, the
camera is not recognized.
If no
USB3 Vision Device
is displayed under the section
Other devices
, continue
with action step
Otherwise, continue with action step
1. Look at the section
Universal Serial Bus controllers
.
2. Disable the new found
USB Composite Device
and enable it again.
This creates the entry under the section
Other Devices
as shown in
Manual Vimba Driver installation
Windows: For manual
Vimba
driver installation, see instructions below.
Screenshots are examples
The following screenshots were taken on a test system. The view may be different,
depending on the configuration of your system.
Figure 35: Windows Device Manager, unrecognized USB3 Vision camera