C613-50170-01 Rev B
Command Reference for x510 Series
127
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE
AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
DELETE
DEBUG
delete debug
Overview
Use this command to delete a specified debug output file.
Syntax
delete debug <
source-name
>
Mode
Privileged Exec
Example
To delete debug output, use the following command:
awplus#
delete debug
Output
Figure 2-3:
CLI prompt after entering the
delete debug
command
Related
Commands
Parameter
Description
<source-name>
The filename and path where the debug output originates.
See
on page 106 for valid URL syntax.
Enter source file name []:
