C613-50170-01 Rev B
Command Reference for x510 Series
138
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE
AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
MOVE
DEBUG
move debug
Overview
This command moves a specified debug file to a destination debug file.
Syntax
move debug {<
destination-name
>|debug|nvs|flash|usb}
Mode
Privileged Exec
Example
To move debug output onto a USB storage device with a filename “my-debug”, use
the following command:
awplus#
move debug usb:my-debug
Output
Figure 2-5:
CLI prompt after entering the
move debug
command
Related
Commands
Parameter
Description
<destination-name>
The filename and path where you would like the debug
output moved to. See
on page 106 for valid
syntax.
Enter source file name []:
