Allied Telesis x510-28GPX, Command Reference Manual

Page: 1243 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1243
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IGMP
AND
IGMP S
NOOPING
C
OMMANDS
SHOW IP IGMP SNOOPING MROUTER
show ip igmp snooping mrouter
Overview Use this command to display the multicast router ports, both static and dynamic,
in a VLAN.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax
show ip igmp snooping mrouter [interface < interface >]
Mode User Exec and Privileged Exec
Example To show all multicast router interfaces, use the command:
awplus# show ip igmp snooping mrouter
To show the multicast router interfaces in
vlan1
, use the command:
awplus# show ip igmp snooping mrouter interface vlan1
Output Figure 30-3: Example output from show ip igmp snooping mrouter
Figure 30-4: Example output from show ip igmp snooping mrouter interface
vlan1
Related
Commands
ip igmp snooping mrouter
Parameter Description
interface
A specific interface.
< interface >
The name of the VLAN interface.
VLAN Interface Static/Dynamic

1 port1.0.5 Statically configured

200 port1.0.2 Statically configured

VLAN Interface Static/Dynamic

1 port1.0.5 Statically configured
