Allied Telesis IS230-10GP, Web User Manual

Page: 69 / 136

Chapter 2: Managing Switch
70
The following table describes the items in Figure 46 on page 69.
The MST Instance ID Information settings in the ensuing table are
informational only: MSTI ID and VID List.
MST Instance Priority Settings
The MST Instance Priority Settings allows you to specify the MST instance
and the bridge priority in that instance.
To access this page, click
L2 Switching > Spanning Tree > MST
Instance Priority Settings .
Figure 47. L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in Figure 47.
The MST Instance Priority Information settings in the ensuing table are
informational only: MSTI ID, Priority and Action.
MST Instance Info
To access this page, click L2 Switching > Spanning Tree > MST
Instance Info . The tables in this window are informational only.
The STP Bridge Status settings in the ensuing table are informational
only: Bridge Identifier, Designated Root Bridge, Root Path Cost,
Designated Bridge, Root Port and TCNLast Topology Change.
Table 43. MST Instance ID Settings
Item Description
MSTI ID Enter the MST instance ID (0-15).
VID List Enter the pre-configured VID list.
Move Click Move to save the values and update the screen.
Table 44. MST Instance Priority Settings
Item Description
MSTI ID Click the drop-down menu to specify the MST instance.
Priority Click the drop-down menu set the bridge priority in the specified MST
instance
Apply Click Apply to save the values and update the screen.