manualshive.com logo in svg

Allied Telesis DNC10 Series, Installation And User Manual

Share
Download
Allied Telesis DNC10 Series Installation And User Manual Download Page 81

DNC10 Series Network Interface Cards Installation and User’s Guide

81

Priority & VLAN

The Priority & VLAN feature allows you to control sending and receiving 
tagged frames of QoS and VLAN. 

When the property is set to Priority & VLAN Enabled, the adapter sends 
and receives QoS and VLAN tagged frames; with Priority Enabled, the 
adapter sends and receives QoS tagged frames; with VLAN Enabled, 
the adapter sends and receives VLAN tagged frames. To assign a VLAN 
ID to the adapter, see “VLAN ID” on page 94.

To enable or disable the Priority & VLAN feature, do the following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 58. 

2. Select 

Priority & VLAN 

in the Property box.

The Priority & VLAN page is displayed as shown in Figure 39.

Figure 39. Priority & VLAN Page

3. Select one of the following options:

Priority & VLAN Enabled —

 Allows for packet 

prioritization and VLAN tagging. This is the default 
setting.

Summary of Contents for DNC10 Series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands