manualshive.com logo in svg

Allied Telesis DNC10 Series, Installation And User Manual

Share
Download
Allied Telesis DNC10 Series Installation And User Manual Download Page 94

Chapter 4: Modifying Advanced Properties

94

VLAN ID

The VLAN ID property allows you to specify a VLAN ID on your network to 
the adapter port. The adapter port adds the value of the VLAN ID to a 
frame in the VLAN tag before transmitting the frame.

To change the VLAN ID value, do the following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 58. 

2. Select 

VLAN ID 

in the Property box.

The VLAN ID page is displayed as shown in Figure 47.

Figure 47. VLAN ID Page

3. Specify a VLAN ID in the Value box. 

The range of the value is from 0 to 4094. The default value is 0. 
Leaving the VLAN ID set to 0 will result in no VLAN tag being added to 
egress packets, even if VLAN is enabled. This field must be set to the 
desired VLAN ID if VLAN headers are desired. 

4. Click 

OK

.

Summary of Contents for DNC10 Series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands