CentreCOM 3600 Series Hub/Repeaters
9
2.
Remove the interrepeater bus dust cover from the back of any newly
shipped AT-3600 module before installing it in a multi-module chassis.
The interrepeater bus port is located on the back panel of every
AT-3600 module. See Figure 4.
3.
Remove the rubber feet from the bottom of any newly shipped AT-3600
Series module before installing it in a multi-module chassis. See
Figure 5.
4.
Reinstall the screws, after removing the rubber feet, to prevent the
module casing from expanding and warping.
5.
Attach the chassis guide/handle assembly to each side of the module,
using the screws provided with the chassis. See Figure 6.
Figure 4:
Removing the
Interrepeater Bus
Dust Cover
Figure 5:
Removing Rubber
Feet from Module
Figure 6:
Attaching Chassis
Guides
INTERREPEA
TER BUS
FIRMW
ARE CASSET
TE
STA
TUS
POWER
MASTER
FAUL
T
INTERREPEA
TER BUS
FIRMW
ARE CASSET
TE
STA
TUS
POWER
MASTER
FAUL
T
IEEE 802.3
/ ETHERNET 1
0 BASE
2
8 PORT HUB
/ REPEA
TER
with Network Management
AT-36xx with dust cover installed
AT-36xx with dust cover removed
Dust Cover
Interrepeater Bus
Port Connector
Interrepeater
Bus Port
Connector
AT-36xx with dust cover installed
AT-36xx with dust cover removed
Dust Cover
AUI
Rubber foot
(1 of 4)
Reinstall
all 4 screws
AUI
10 BASE-T
RS-232
TERMINAL PORT
POWER
STATUS
MASTER
POWER
FAULT
APPLIQUÉ PORT
3612TR
CentreCOM
TM
IEEE 802.3/ETHERNET 10BASE2
MULTIPORT HUB / REPEATER
with Network Management
LINK
1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
8
9
10
11
12
X
X
X
X
X
X
X
X
X
X
X
X
2
4
12
10
6
8
1
3
11
9
5
7
PORT ACTIVITY
10 BASE T NETWORK PORTS
No Link
Link
Receiving
Indicator OFF
Indicator ON
Indicator FLASHING
PORT STATUS
INDICATOR STATUS
Front
of
module
Chassis
guide handle
