TurboStack Chassis and Backplanes
3
The backplanes provide:
❑
SNMP redundancy within the chassis
❑
Automatic software downloads to all hub modules in the chassis
❑
The ability to hot swap hub modules in the chassis
The 7-slot segmented backplane chassis provides for the installation of up to
six hubs and one switch. Figure 2 shows an example of a 7-slot segmented
backplane chassis with a variety of TurboStack hubs and an AT-TS90TR
switch.
Figure 2:
Fully-Populated 7-Slot Rackmount Chassis with Segmented Backplane
The hubs in Figure 2 occupy the first six slots and the switch occupies slot 7 of
the chassis. The chassis in Figure 2 is a rackmount model.
Master module
Backup module
Slave modules
Switch
chap1.features Page 3 Thursday, August 29, 1996 10:26 AM
