36
Standards: This product meets the following standards.
!
1
RFI Emission
EN55022 Class A, EN61000-3-2,
EN61000-3-3
!
2
Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
!
3
Immunity
EN55024
!
4
Electrical Safety
EN60950, UL1950 (UL/cUL)
!
5
Laser
EN60825
Safety
!
6
Warning: Class 1 Laser product.
!
7
Warning: Do not stare into the laser beam.
!
8
Electrical Notices
Warning: Electric Shock Hazard
To prevent electric shock, do not remove the cover. No user-serviceable
parts inside. This unit contains hazardous voltages and should only be
opened by a trained and qualified technician. To avoid the possibility of
electric shock, disconnect electric power to the product before connecting or
disconnecting the LAN cables.
!
9
Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
!
10
Caution: Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the
manufacturer or the FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
