Allied Telesis AT-MMC200/LC, Installation Manual

Page: 49 / 66

MMC2000/200 Series Mini Switching Media Converter Installation Guide
49
4. Slide the transceiver into the SFP slot until it clicks into place. See
Figure 32.
Figure 32. Inserting the SFP
5. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 33. This secures the transceiver and prevents it from
being dislodged from the slot.
Figure 33. Positioning the SFP Handle in the Upright Position
Note
SFP transceivers are dust-sensitive. Always keep the plug in the
optical bores when a fiber-optic cable is not installed, or when
storing the SFP. When you do remove the plug, keep it for future
use.
Note
Unnecessary removal and insertion of an SFP can lead to premature
failure.
SFP Transceiver
Handle