Allied Telesis AT-MC13, User Manual

Page: 13 / 30

ìê
Electrical Safety and Installation Requirements
STANDARDS: This product meets the following standards.
AT-MC13, AT-MC14, AT-MC16 RFI Emission EN55022 Class A
WARNING: In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
AT-MC15 RFI Emission EN55022 Class B
Immunity EN50082-1
AT-MC13, AT-MC14, AT-MC16 WARNING: This product requires shielded cables to comply
with emission and immunity standards. If it is used with unshielded cables, the user may be
required to take measures to correct the interference problem at their own expense.
SAFETY
Power to the hub must be sourced only from the adapter.
EUROPE—EC
Use TÜV licensed AC adapter of 12 Vdc, min 500 mA.
OTHER COUNTRIES
Use a Safety Agency Approved AC adapter of 12 V dc, min 500 mA.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.