Allied Telesis AT-iMG7x6MOD series, Installation Manual

Page: 22 / 56

AT-iMG746MOD Installation Guide
22 Chapter 3: Installing the Gateway in the Enclosure
Connecting the 1G LAN (RJ-45) - if applicable
With the WAN-GIG-BD-LN module, both the WAN and LAN ports can be configured, since the LAN side
is an RJ-45 that is configured directly on the module. Refer to the following figure.
Note
Activating the copper Gigabit LAN interface disables the interface to the T1/E LAN module, and so the
T1/E LAN module cannot be used.
Figure 13. Configuration with the WAN-GIG-BD-LN Module
iMAP configured with Fiber Card
iMG-LAN-functional
Router with netwotk
1G WAN with
1G LAN
Central Office/POP
Customer
WAN Input
Fiber
(FX, EPON, etc)
LAN