AT-iMG646MOD Installation Guide
Chapter 3: Installing the Gateway in the Enclosure
15
Connecting the Coax to the Home Network (if applicable)
With the HPNA card, the AT-iMG646MOD allows PCs, Set Top Boxes, VCRs, etc. to become members of
an ethernet subnet over the coax network that is already installed. Figure 8 shows an example of how the
devices could be configured. The coax-to-ethernet converter can be purchased as ATI Part Number AT-
iMG007..
Figure 8. Coax Network Configuration
To connect the coax cable, perform the following procedure:
1. Remove the grommet from the power cord entrance, cut a 1/4” “X” in it, and put it back in place.
2. Slip the coax through the grommet.
3. Connect the coax cable to the HPNA card, as shown in Figure 9.
4. Seal the grommet with tape and silicone and silicone sealant.
5. Tie-wrap the coax, using one of the secure posts or the bottom channel.
Figure 9. Connecting to coax cable
AT-iMG646MOD
as Master
Splitters are passive with
4-20 GHz range
Coax 25 to 35m
Coax 3 to 5m
1:4 Splitter
1:2 Splitters
Coax to ethernet
converter
1:2 Splitters
1:2 Splitters
network_physical_coax.ai
Summary of Contents for AT-iMG646MOD
Page 4: ...Contents 4 Using a Swab 42...
Page 44: ...44...
Page 45: ...AT iMG646MOD Installation Guide 45 613 000730 A...
Page 46: ...Appendix B Cleaning Fiber Optic Connectors 46...
