Chapter 3: Turn-Up and Troubleshooting
AT-iMG2400 Series Installation Guide
28
7.
The iMG now has power and the correct loads, and can provide some level of service if it is provided in
the downloaded files.
Understanding the LEDs
Figure 14: LEDs
Table 2: LEDs
LED
Meaning
PWR
ON - The iMG is receiving power and the voltage is
within the acceptable range.
OFF - The unit is not receiving power.
SYST
ON and Green - System is working normally
If LED is red, the status can be:
- ON – System is in Boot Phase
- Blinking (2Hz) Files are being written to FLASH
- Blinking (4Hz) Files are being downloaded
If light is orange, the status can be:
- Blinking – System at the Boot Loader Prompt
- ON – Need to release the reset button so the
default configuration will be loaded
