12
12
DC Power
Connector
The AT-FS708LE/PoE switch has a single DC power supply socket on the
back panel. Use the AC power adapter that came with the switch to supply
AC power.
To power ON or OFF the switch, connect or disconnect the power cord.
Note
Allied Telesis recommends attaching the power cord to the switch
before plugging the power cord into a wall outlet.
Table 1. System and Port LEDs
LED
State
Description
POE MAX
Green
The power that the switch is providing to
the connected PDs reaches the
maximum.
Off
The power that the switch is providing is
under the maximum.
PWR
Green
The switch is powered ON and operating
normally.
Off
The switch is not receiving power.
POE
Green
The connected PD is receiving power.
Red
The connected PD has an error.
L/A
Green
A valid link is established on the port.
Blinking Green
Frames are being transmitted/received
on the port.
SPD
Green
The port is operating in 100Mbps.
Off
The port is operating in 10 Mbps.
