Installing the Bridging Converter
28
9.
Secure the power supply cable in the Restricted Access Area using
multiple cable ties to minimize the chance of the connections being
disturbed by casual contact with the wiring.
Warning
"Safety Hazard"- Check to see if there are any exposed copper strands
coming from the installed wires. When this installation is done correctly
there should be no exposed copper wire strands extending from the
terminal block. Any exposed wiring can conduct harmful levels of
electricity to persons touching the wires.
17
10. With the wires securely connected to both the input power connector in
the rear of the unit and the terminal block on the power adapter, plug the
power adapter to the power outlet. (Refer to “Technical Specifications” on
page 35 for power requirements.)
11. Verify that the PWR LED on the front of the unit is green. If the PWR
LED is OFF, refer to “Troubleshooting” on page 31.
12. Perform Step 7 through Step 10 on page 22 to complete the installation.
