manualshive.com logo in svg

Allied Telesis AT-9724TS, Installation And User Manual

The Allied Telesis AT-9724TS is a high-performance network switch designed for seamless connectivity and maximum efficiency. With its advanced features and robust performance, this product guarantees unparalleled reliability for your network infrastructure. For detailed specifications and configuration guidance, download the free datasheet and user manual from manualshive.com.

Share
Download
background image

Parameter

Description

User Name

Enter an alphanumeric string of up to 32 characters.This is used to identify the SNMP user.

Group Name

This name is used to specify the SNMP group created can request SNMP messages.

SNMP Version

V1 

– Specifies that SNMP version 1 will be used.

V2 

– Specifies that SNMP version 2 will be used.

V3 

– Specifies that SNMP version 3 will be used.

Auth-Protocol

MD5 

– Specifies that the HMAC-MD5-96 authentication level will be used.This field is only operable when V3 is

selected in the 

SNMP Version

field and the 

Encryption

field has been checked.This field will require the

user to enter a password.

SHA 

– Specifies that the HMAC-SHA authentication protocol will be used.This field is only operable when V3 is

selected in the 

SNMP Version

field and the 

Encryption

field has been checked.This field will require the

user to enter a password.

Priv-Protocol

None 

– Specifies that no authorization protocol is in use.

DES 

– Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard.This field is

only operable when V3 is selected in the 

SNMP Version

field and the 

Encryption

field has been checked.

This field will require the user to enter a password between 8 and 16 alphanumeric characters.

Encrypted

Checking the corresponding box will enable encryption for SNMP V3 and is only operable in SNMP V3 mode.

To implement changes made, click 

Apply

.To return to the 

SNMP User Table

, click the Show All SNMP User Table Entries link.

SNMP View Table

The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP manager.To view the

SNMP View Table

, open the 

SNMP Manager

folder and click the 

SNMP View Table

entry.The following screen should appear:

Figure 8- 4. SNMP View Table

To delete an existing 

SNMP View Table

entry, click the 

8

in the 

Delete

column corresponding to the entry you wish to delete.To create a new entry, click

the 

Add

button and a separate menu will appear.

151

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

Summary of Contents for AT-9724TS






































































































































































































Reviews:

No comments

Related manuals for AT-9724TS

H3C SR6600 SPE-FWM Vxlan Command Reference preview
SR6600 SPE-FWM
Brand: H3C Pages: 45
H3C SR6600 SPE-FWM Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 80
H3C MSR 5600 Configuration Manual preview
MSR 5600
Brand: H3C Pages: 46
H3C MSR 5600 Comware 7 Vxlan Command Reference preview
MSR 5600
Brand: H3C Pages: 45
H3C MSR 3600 Quick Start preview
MSR 3600
Brand: H3C Pages: 4
H3C SR6600 SPE-FWM Fundamentals Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 184
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Brand: Watchguard Pages: 40
Speedtouch IPQoS Configuration Manual preview
IPQoS
Brand: Speedtouch Pages: 124
THOMSON SpeedTouch 605 User Manual preview
SpeedTouch 605
Brand: THOMSON Pages: 212
Hama 49062 Instruction Manual preview
49062
Brand: Hama Pages: 24
Fluke Network Tester User Manual preview
Network Tester
Brand: Fluke Pages: 102
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Brand: Avocent Pages: 2
Westermo Viper-012 User Manual preview
Viper-012
Brand: Westermo Pages: 22
B&B Electronics ZXT9-IO-222R2 Product Manual preview
ZXT9-IO-222R2
Brand: B&B Electronics Pages: 74
Asus RT-AC56U User Manual preview
RT-AC56U
Brand: Asus Pages: 30
Asus OnHub User Manual preview
OnHub
Brand: Asus Pages: 4
Asus RT-AC1500UHP Quick Start Manual preview
RT-AC1500UHP
Brand: Asus Pages: 60

Brands by name

Popular brands

Load more brands