1
English
Addendum
AT-3726XL, AT-3716XL, and AT-3714FXL Ethernet Switch
Installation Guide
(PN 613-10766-00 Rev A)
AT-3726XL and AT-3716XL Quick Install Guide
(PN 613-10769-00 Rev A)
DC Power Source Installation Instructions for an
AT-D3726XL Ethernet Switch
The instructions in this addendum explain how to connect an AT-D3726XL
Ethernet Switch to a 36 - 60 V dc
power source. For additional
installation information, refer to the Installation Guide and the Quick Install
Guide listed above.
Warning
FOR CENTRALIZED DC POWER CONNECTION, INSTALL ONLY IN A
RESTRICTED ACCESS AREA.
Note
A tray cable is required to connect the power source if the unit is powered by
centralized DC power. The tray cable must be UL listed Type TC tray cable and
rated at 600 V and 90 degree C, with three conductors, minimum 14 AWG.
Warning
ONLY TRAINED AND QUALIFIED PERSONNEL ARE ALLOWED TO INSTALL
OR REPLACE THIS EQUIPMENT.
