Allied Telesis AT-2812FX Installation And User Manual Download Page 22

Page: 22 / 82

Chapter 2: Installing the Hardware

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install a
module.

Note

The



indicates that a translation of the safety statement is

available in a PDF document titled “Translated Safety Statements”
posted on the Allied Telesis website at www.alliedtelesis.com/
support/software/.

Warning

This is a “Class 1 LED product”.



Warning

Do not stare into the laser beam.



Warning

Do not look directly at the fiber optic cable ends or inspect the cable
ends with an optical lens.



E29

Warning

Do not work on this equipment or cables during periods of lightning
activity.



Warning

Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.



Note

All Countries: Install this product in accordance with local and
National Electric Codes.



Summary of Contents for AT-2812FX



















































































Search results

Summary of Contents for AT-2812FX

Reviews:

Allied Telesis AT-2812FX, Installation And User Manual, Page: 22 / 82

Search results

Summary of Contents for AT-2812FX

Reviews: