17
45-074, REV. 5/18
Gearbox
Capscrew
Motor
Capscrew
Housing Cover
Figure 5-8, Motor Removal
4. Remove the pinion gear and key from the output shaft.
Use a screwdriver to knock loose the key.
Equipment damage hazard.
Impact wrenches could damage screws
or sockets if screws have been secured
with Loctite.
Use care when working with the gear
assembly. Do not use a impact wrench on
the screws that have been secured with
Loctite.
CAUTION
Oil leak hazard.
Removing the adapter plate without
draining the oil can result in a large oil spill.
Drain oil from the gearbox before removing
the adapter plate.
5. Remove the capscrews from the adapter plate. The
adapter plate capscrews are installed with Loctite, use
a long handle wrench to them break loose. Lightly tap
the back of the adapter plate with a rubber mallet to
remove. (Figure 5-9)
Key
Screwdriver
Pinion Gear
Capscrew
Capscrew
Adapter
Plate
Figure 5-9, Adapter Plate Removal
6. The output shaft seals may now be serviced. (Figure
5-10)
O-Ring
Seal
Adapter Plate
Figure 5-10, Output Shaft Seals
