TLW2188N_SVG
Heavy
TLW2189N_SVG
Soak
TLW2190N_SVG
Pre-Wash
TLW2191N_SVG
Second Rinse
CPW70_SVG
Wash Indicator
TLW2193N_SVG1
Rinse Indicator
CPW65_SVG
Spin Indicator
NOTE: Lid lock keypad only on models through Serial
No. 1908000001.
Digital Display
The two-digit display is used to show the time remaining in a cycle.
If the cycle time is over 99 minutes the control will display either
1H, 2H, etc., and then the additional minutes over one or two
hours.
When the control is powered off, the right-most decimal in the dis-
play will flash every one to five minutes to indicate that the machine
is in Idle Mode.
The display also shows diagnostic codes.
Soak
In the lower right of the display, a single light will flash during any
soak portion of the cycle.
The soak light also will flash once every one to five minutes in Idle
Mode. Idle Mode is entered if no keypads have been pressed for five
minutes after a cycle is finished. Press the Power/Cancel keypad to
exit this mode and power the display for cycle/option selection. This
light will flash again after five minutes when it re-enters Idle Mode.
Cycles
The following cycle descriptions will help determine which cycle to
choose depending on the type of laundry being washed. The descrip-
tions are standard settings that may be modified using the Selec-
tions and Options.
The last cycle that is set, including selections and options, is saved
even if the control is turned off.
Heavy Duty
Use for sturdy items, like play or work clothes, towels, T-shirts, etc.
The wash time selection will depend on the type of fabric and the
amount of soil. For the best results when cleaning heavily soiled
items, use a higher soil level selection. Lightly soiled items require
less wash time.
Use the Prewash setting for extra heavily soiled items. During the
PREWASH setting, the washtub will fill with water, agitate for a re-
duced period of time and spin out.
Normal Eco
This cycle uses a spray rinse to reduce water consumption. It also
uses less hot water. This cycle is recommended for washing every-
day cottons and linens. If using fabric softener in this cycle, select
the Second Rinse option.
Perm Press
Use for permanent press items and synthetics. The final spin is a
low spin speed.
Delicate
Wash delicate items usually washed by hand on this cycle. A full tub
of water is recommended (even for small loads) to allow the deli-
cate items to move freely through the water. More water helps re-
duce fabric wear, wrinkling, and provides for a clean wash.
On this cycle, the agitation during the wash portion of the cycle is
not constant. The wash will alternate between periods of agitation
and then a short soak until advancing to the spin portion of the cy-
cle. All spin speeds are a low spin.
Rinse & Spin
Use to quickly rinse items. The rinse is followed by a high spin.
Spin
Use this cycle to extract water from wet items. The cycle uses the
high spin.
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change the cycle’s wash water tempera-
ture from the default selection to Cold, Warm, or Hot.
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11
Part No. 203945ENR1
