7
CAUTION
Operators should always wear gloves or use pellet / plate lifters when dispensing.
After the unit is turned off, the pellets / plates remaining inside the unit will remain hot
for some time.
CLEANING
CAUTION
Make sure unit is unplugged and cool before attempting to clean.
The following procedures should be followed during the regular cleaning routine
on all of the pellet heaters.
1.
Turn the unit off, disconnect the plug from the outlet, and allow the cabinet to
cool. Remove plug by pulling it straight out.
Never pull on cord
.
2.
Pull the elevator mechanisms up and out, place them on a work surface. You
can wipe down the mechanisms with a damp cloth to clean them.
3.
Clean out any debris inside the cabinet and wipe the cabinet down with a
damp cloth.
4.
Place the elevator mechanisms back inside the cabinet and clean the outside of
the cabinet with a mild, non-abrasive soap or detergent in a warm water
solution. A commercial stainless steel cleaner can also be used for this
procedure.
NOTE:
Do not use abrasives, harsh chemicals, or chlorine products for cleaning.
WARNING
Do not steam or pressure clean or hose down the cabinet. This could
damage the equipment and possibly cause an electrical shock to the
operator.
WARNING
Repairs should be done by qualified service personnel only.
