© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
70420301 (EN)
22
4. Remove four front panel screws. Refer to
. Keep door hinge cams in place on door
hinge lug. Pull lug and door assembly off as one
5. Remove remaining front panel screws, four on
the top and four on the bottom. Refer to
.
Disconnect door switch harness from switch.
Take off front panel. Refer to
6. Exchange switch and plug locations. Depress
tabs with an adjustable pliers to remove plug and
switch from front panel. Reinstall switch,
orienting button toward center of machine.
Reinstall plug in switch’s previous location.
Figure 7
7. Reroute door switch harness up through top
panel, along underside of front flange, through
screw cable clamp, back down through top panel
and into upper left quadrant of cylinder
enclosure. Refer to
.
Figure 8
TMB1995N
1
Plug
2
Switch
3
Side Screw
4
Door Hinge Lug
5
Door Assembly
TMB1995N
1
2
3
4
5
TMB1996N
1
Screw Cable Clamp
2
Beginning Location of Door Switch Harness
3
Original Switch Location
4
Lint Panel Switch Harness
5
Wire Ties
6
Original Plug Location
7
Top Panel
1
2
3
4
5
6
7
Summary of Contents for YT050E
Page 2: ......
