© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
F8208801
14
Manual Mode Flowchart
PHM1485R
Figure 2
Enter Manual Mode.
Press and hold both #4 keypad and
#1 keypad at the same time.
“rAPd” - Quickly advance through active
cycles.
1. Press START (enter) keypad to begin Rapid
Advance cycle and advance through cycle
steps.
“AUdt” - Retrieve audit information for
machine.
1. Press START (enter) keypad.
“CyC” - Total number of machine cycles:
1. Press START (enter) once to read audit.
“rSEt” - Reset the control’s programming data
to factory default.
1. Press START (enter) keypad.
“Prog” - Program cycle information and other
features into the control.
1. Refer to the
Manual Programming
flowchart.
“dIAg” - Run diagnostic tests on machine
operations.
1. Press START (enter) keypad. Refer to
Diagnostic Tests
flowchart.
“rCyC” - Total number of rapid advance cycles:
1. Press START (enter) once to read audit.
(Option available on Software Version 2 or later)
PHM148
Summary of Contents for UWL035K12
Page 2: ......
