Alliance Laundry Systems UD08F055, Programming Manual, Page: 11 / 16

Programming Supplement
9
1300546 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
This section offers a detailed description of all 7
options available to program.
Each description includes instructions on how to
program the option.
For more advanced users, a quick reference list of the
options available through the programming mode is in
<$elemtext<$elemtextTable 1<$elemtext .
Temperature Measurement Unit
This option allows the owner to select whether the
temperature will be displayed in Fahrenheit or Celsius.
How to Program Temperature Measurement Unit
1. Control must be in Programming Mode. Refer to
Entering Programming Mode section.
2. The current setting is shown on the Temperature
display, while “U” is shown on the Speed display.
Available values: °C / °F
Default value: °C
3. Press the Increase Preset Temperature keypad (+)
or Decrease Preset Temperature keypad (–) to
change the set value.
4. Press Display Preset Temperature keypad (SET)
to confirm the current value and proceed to the
next parameter.
How to Exit Programming Mode
To exit Programming Mode, press STOP keypad or
turn finisher off and on.
Maximum Preset Temperature
This option allows the owner to set the maximum
value the user may select when selecting an operating
temperature.
How to Program Maximum Preset Temperature
1. Control must be in Programming Mode. Refer to
Entering Programming Mode section.
2. The current value is shown in the Temperature
Display, while “M” is shown on the Speed
display.
Default value: 180 °C (356°F)
Parameter range: 1 - 180 °C (34 - 356 °F)
Precision: 1°C (1.8°F)
3. Press the Increase Preset Temperature keypad (+)
or Decrease Preset Temperature keypad (–) to
change the set value.
4. Press Display Preset Temperature keypad (SET)
to confirm the current value and proceed to the
next parameter.
How to Exit Programming Mode
To exit Programming Mode, press STOP keypad or
turn finisher off and on.
Operating Temperature
This option allows the owner to set the operating
temperature.
How to Program Operating Temperature
1. Control must be in Programming Mode. Refer to
Entering Programming Mode section.
2. The current value is shown in the Temperature
Display, while “r” is shown on the Speed display.
Default value: 130 °C (266°F)
Parameter range: 1 - 180 °C (34 - 356 °F)
Precision: 1°C (1.8°F)
3. Press the Increase Preset Temperature keypad (+)
or Decrease Preset Temperature keypad (–) to
change the set value.
4. Press Display Preset Temperature keypad (SET)
to confirm the current value and proceed to the
next parameter.
Programmable Options Available
Temperature Measurement Unit
Maximum Preset Temperature
Operating Temperature
Temperature Regulation Hysteresis (Variance)
Temperature for Automatic Shut-down
Heating Type
Number of Resistor Groups Installed
Table 1