Alliance Laundry Systems Stacked Clothes Dryer, Installation & Operation Manual

Page: 15 / 118

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
13
510975
Before You Start
Tools
For most installations, the basic tools you will need
are:
Figure 3
Gas
Dryer is equipped for Natural Gas with a 3/8" N.P.T.
gas supply connection. For more detailed information,
refer to section on
Gas Requirements .
Location
Place the dryer on a solid floor with an adequate air
supply. For more detailed information, refer to section
on
Location Requirements .
Exhaust
Use rigid metal duct and exhaust the dryer to the
outside by the shortest route possible.
Figure 4
NOTE: For more detailed information, refer to
section on
Dryer Exhaust Requirements .
Electrical
●
ELECTRIC DRYER
Dryer needs a 3 or 4 wire 120/240 or
120/208 Volt, 60 Hertz, 30 Amp, AC single
phase electrical supply for each unit.
●
GAS DRYER
Dryer needs a 120 Volt, 60 Hertz, 15 Amp,
polarized 3-slot effectively grounded receptacle
for each unit.
NOTE: For more detailed information, refer to
section on
Electrical Requirements .
D818I
1 Wrench
2 Screwdrivers
3 Level
4 Teflon Tape
5 Duct Tape
2
1
3
4
5
D354I