Alliance Laundry Systems LWS01M series, Troubleshooting Manual

Page: 21 / 36

39311
19
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
11. No Spin
No spin.
Is timer
inoperative?
Test for
continuity
through timer
circuits (refer
to wiring
diagram) and
replace if
inoperative.
Yes
Motor
won't run?
Refer to Test
Procedures
section to
check switch
and windings.
Yes
Is there no
clearance
between
brake pads
and discs?
Replace pads
and brake
assembly.
TLW367S
Has drive
motor
overload
protector
cycled?
Wait two or three
minutes for
overload protector
to reset. If
protector cycles
repeatedly, refer
to
Paragraph 9 .
Yes
Is there a
bind in
pump?
Replace pump.
Yes
Close lid or test
switch and
replace if
inoperative.
Yes
Is there
broken, loose
or incorrect
wiring?
Refer to
appropriate
wiring diagram.
Yes
Is lid open
or lid switch
inoperative?
Yes
Is there oil
on belt?
Replace belt.
Yes
Is drive
belt
broken or
loose?
Replace belt.
Yes
No
No
No
No
No
No
Is motor pulley roll
pin sheared
(through Serial No.
001113645)?
Remove drive
motor and
replace roll pin
and any other
damaged
parts.
No
Yes
No
No