66
800793
Section 6 Adjustments
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
42. LOADING DOOR
a. Open loading door.
b. Remove door bezel to gain access to nuts. Refer
to Figure 25.
c. The loading door can be adjusted up or down
somewhat by loosening screws holding door to
hinge, then raise or lower door before
retightening screws. Refer to Figure 25.
Figure 25
H212SE1B
DOOR BEZEL
ATTACHING SCREW
LOADING
DOOR
ATTACHING
SCREW
NUT
LOCKWASHER
DOOR
BEZEL
INNER DOOR
AND GLASS
INNER
DOOR
AND
GLASS
HINGE
ASSEMBLY
