Alliance Laundry Systems HTE517, Programming Manual

Page: 31 / 79

800000
29
6. Special Vend A Start Time
“SAS”
This option allows the user to set the time that Special
Vend A will begin.
How to Program Special Vend A Time
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 19.
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until
“SAS”
appears in the VFD. See Figure 20.
4. When
“SAS”
appears in the VFD, press the PERM
PRESS pad. The current start time (in military
time) will appear in the VFD.
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the current hour to the
desired hour. See Figure 21.
6. Press the PERM PRESS (enter) keypad when the
correct hour appears in the VFD. The next option,
“SAE”
, will appear in the VFD.
NOTE: To program “SAE” (Special Vend A End
Time), see option 7. To program other options, refer
to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Figure 19
Figure 20
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C111IE1A
Figure 21
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A