Alliance Laundry Systems DRY2024N User Manual Download Page 8

-8-

802716

Drying Special Items

Type of Load

Special Instructions

Bedspreads

Choose heat for fabric.

Dry one double or two single spreads.

Chenille and tufted spreads will shed lint and should be dried by themselves.

New spreads will contain loose lint. Tumble on NO HEAT Fabric Selector setting before 
washing to remove loose lint. 

Dry completely.

Blankets

Electric

Synthetic Fibers

Thermal Cotton

Wool

Choose DELICATE or NO HEAT Fabric Selector setting.

If drying items in dryer is recommended by the manufacturer, dry as for wool.

Do not stretch the blanket because of the wiring.

Some electric blankets may have an insulation on the thermostats or on the wiring 
which will not withstand dryer heat. Do not dryer dry unless the blanket 
manufacturer says it can be done.

Choose DELICATE or NO HEAT Fabric Selector setting.

Some blankets are fluffy and will shed lint. Tumble on NO HEAT Fabric Selector 
setting before washing to remove loose lint.

Dry in dryer until just dry. 

Clean lint filter half way through drying cycle.

Choose AUTOMATIC REGULAR/DELICATE cycle.

Agitation and tumbling contribute to the shrinkage and felting of wool. Follow blanket 
manufacturer’s instructions for proper care.

Use approximately five dry bath towels and place them between folds in blanket to 
lessen the tumbling.

Set dryer for 20 minutes on the TIME DRY cycle. Use REGULAR Fabric Selector 
setting. Check blanket when timer reaches 10. Wool blankets must be removed from 
the dryer when damp.

Stretch item gently to shape and finish drying in a flat position.

Curtains

Cotton

Fiberglass

Synthetic Fibers

Choose AUTOMATIC REGULAR/DELICATE or TIME DRY cycle.

Remove damp items for ironing or dry completely and then steam iron.

DO NOT dry in the dryer unless recommended by the manufacturer.

Fiberglass may shred. Particles may remain in the dryer and rub off on the next load. 

“Beta” fiberglass may be dryer dried if recommended by the manufacturer.

Choose DELICATE or NO HEAT Fabric Selector settings.

Allow room for tumbling to prevent wrinkling.

Delicate or sheer curtains must be dried by themselves so they will not be snagged by 
hooks or crushed by other clothes in the load.

Some sheer curtains are heat sensitive. Dry 10 minutes only, plus the cool down 
period. Remove from dryer immediately and hang.

If the dryer has been heated from a previous load, the NO HEAT Fabric Selector 
setting may be sufficient.

Denim, Corduroy

Choose AUTOMATIC REGULAR/DELICATES cycle.

Dry completely and remove from dryer when seams are slightly wet to minimize 
shrinkage.

Summary of Contents for DRY2024N



















Reviews: