© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
512680
36
Step 4: Set Fabric Selector
Select
NORMAL
for cottons,
PERM PRESS/
CASUAL
for permanent press,
DELICATE
for
sensitive items or
FLUFF (NO HEAT)
for items that
require no heat.
NOTE: Always follow manufacturer’s care label
instructions.
Figure 43
Step 5: Start Dryer
Nonmetered Models
Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button.
IN USE
light will come on (indicating start of cycle).
Figure 44
Coin Slide Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE
light comes on (indicating start of cycle),
press the PUSH-TO-START button.
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance
section.
NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is
opened.
DRY2185N
DRY2101N
NO HEAT
NORMAL
PERM PRESS
CASUAL
FABRIC SELECTOR
DELICATE
NONMETERED MODELS
W297I
Figure 45
W297I
METERED MODELS
