background image

WARNING

Failure to install, maintain, and/or operate this ma-

chine according to the manufacturer's instructions

may result in conditions which can produce bodily in-

jury and/or property damage.

W030

WARNING

For your safety and to reduce the risk of fire or an ex-

plosion, do not store or use gasoline or other flamma-

ble vapors and liquids in the vicinity of this or any oth-

er appliance.

W022

NOTE: The WARNING and IMPORTANT instructions ap-

pearing in this manual are not meant to cover all possi-

ble conditions and situations that may occur. It must be

understood that common sense, caution, and careful-

ness are factors which cannot be built into these wash-

ers. These factors MUST BE supplied by the person(s)

installing, maintaining, or operating the washer.

Always contact the distributor, service agent, or the manufacturer
about any problems or conditions you do not understand.

Read all instructions before using washer.

This product uses FreeRTOS V7.2.0 (www.freertos.org).

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  3

  Part No. 804648ENR6

Summary of Contents for AFNE9BSP113TN01
































Reviews: