NOTE: If water needs to be removed before opening
the door, run a Spin cycle to pump water out of the
washer.
Out of Balance Load
If at the end of the cycle the load is dripping wet, the washer has
limited the spin speed. This is to prevent damage to the unit if
there is a severely unbalanced load.
If this condition occurs, redistribute the load manually and run a
SPIN cycle.
If the condition persists, consider steps discussed in the Before
Washing section.
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15
Part No. 804648ENR6
Summary of Contents for AFNE9BSP113TN01
Page 2: ......
