505048
7
Coin Slide Guards . . .
(Coin Slide Models Only)
Using serrated hex head screws from accessories bag,
install coin slide guard, to front of control cabinet. See
illustration.
A special security screw kit is available (as optional
equipment at extra cost) for securing the coin slide guard
and front panel to front of dryer. Order Security Kit No.
298P3. A special driver, part number 56217, is available
(as optional equipment at extra cost) for installing the
special security screws.
NOTE: Coin slides and coin drawers are shown for illustration only. You must obtain them locally.
OPERATING INSTRUCTIONS
CLEAN LINT FILTER AFTER EACH LOAD
IN USE
PERM PRESS
NORMAL
FLUFF
(NO HEAT)
DELICATE
PUSH TO START
FABRIC SELECTOR
504210
1.
2.
3.
4.
5.
6.
Select Fabric Type (heat setting)
NORMAL, PERM PRESS,
DELICATE, FLUFF (no heat)
Load Clothes.
Insert Coin(s)/Card.
To Start Dryer - Close Door and Push Start.
To Stop Dryer During Cycle - Open Door.
To Restart Dryer - Close Door and Push Start.
Drying Cycle is Complete When
Panel Light Goes Off.
COIN
SLIDE
GUARD
SERRATED
HEX HEAD
SCREWS
D382IE3B
