26
A(mm)
B(mm)
C(mm)
D
E
760
50 mini
30 mini
Air intake
Air exit 10
mm
Before you install the hob, make sure that
●
The work surface and level, and no structural members
interfere with space requirements.
●
The work surface is made of a heat-resistant material.
●
If the hob is installed above an oven, the oven has a
built-in cooling fan.
●
The installation will comply with all clearance
requirements and applicable standards and regulations.
●
A suitable isolating switch providing full disconnection
from the mains power supply is incorporated in the
permanent wiring, mounted and positioned to comply with
the local wiring rules and regulations.
The isolating switch must be of an approved type and
provide a 3mm air gap contact separation in all poles (or
in all active [phase] conductors if the local wiring rules
allow for this variation of the requirements).
●
The isolating switch will be easily accessible to the
customer with the hob installed.
●
You consult local building authorities and by-laws if in
doubt regarding installation.
●
You use heat-resistant and easy-to-clean finishes (such