manualshive.com logo in svg

allen WB2434, Assembly & Parts Manual, Page: 21 / 48

Share
Download
allen WB2434 Assembly & Parts Manual Download Page 21

 068521

Page 21

SECTION 2

ASSEMBLY

Assembly Instructions

Please follow the instuructions below for assembly: 

Work Bridge Section Connections:

1.  Align WB sections so that the connecting clevis sits outside the rod end.
2.  Insert clevis pin through connecting clevis, also passing through the rod end.
3.  Insert hairpin into hole on clevis pin, locking the clevis pin in place. 
4.  Do this for both sides of the WB section.
5.  Insert connecting pin into square tubing of WB section.
6.  Place bolt through hole provided in mainframe, making sure that bolt also passes through the 

connecting pin. 

7.  Place nut on bolt and tighten. 
8.  Align opposite section so that the bolt hole on the mainframe aligns with the additional hole in the 

connecting pin. 

9.  Once aligned, insert bolt, attach nut and tighten. 

Clevis Pin

Bolt

Connecting Pin

Hairpin

Connecting Clevis

Rod End

Note: 

Pictures are for reference only. 

WB1824 shown

Summary of Contents for WB2434

















































Reviews:

No comments