allen WB1224, Assembly & Parts Manual, Page: 22 / 40

SECTION 2
ASSEMBLY
068521 Page 22
Assembly Instructions
Adjustable End Frame & Pneumatic Tire Assembly
1. Loosen clips on Adjustable End Frame (AEF) and place WB Section “on top”
of AEF.
2. Remove bolt assembly from the rear of the Paving Style Wheel Slides
(PSWS) and slide the PSWS into the slots shown on the AEF.
3. Replace bolt assembly on PSWS.
4. Slide PSWS to desired length and tighten screws on AEF to secure in place.
5. Remove cotter pin and washer from the Pneumatic Tire and Fork (PTF)
assembly.
6. Insert wheel into PSWS and replace washer and cotter pin.
7. Make sure the Locking Pin on the PSWS is securely positioned in one of
the holes provided on the PTF assembly.
WB Section
Adjustable
End Frame
Paving Style
Wheel Slides
Pneumatic
Tire and Fork