allen PRO 430 Operations & Parts Manual Download Page 9

Page: 9 / 104

vii

055561; 01/12

Section 4.0 contains illustrated parts lists for help in ordering replacement parts for your machine.
Follow the instructions below when ordering parts to insure prompt and accurate delivery:

All orders for service parts - include the serial number for the machine. Shipment
will be delayed if this information is not available.

Include correct description and part number from the “PARTS” section of this
manual.

Specify exact shipping instructions, including the preferred routing and complete
destination address.

DO NOT

return parts to AEC without receiving written authorization from AEC. All

authorized returns must be shipped pre-paid.

When placing an order, please contact the AEC dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

Ordering Parts

Summary of Contents for PRO 430









































































































Search results

Summary of Contents for PRO 430

Reviews:

Related manuals for PRO 430

Brands by name

Popular brands

allen PRO 430, Operations & Parts Manual

Search results

Summary of Contents for PRO 430

Reviews:

Related manuals for PRO 430

Brands by name

Popular brands