allen PRO 430 Operations & Parts Manual Download Page 29 | Manualshive

Page: 29 / 104

background image

1-11

055561; 01/12

SECTION 1

SAFETY

1.6

Safety and Operation Labels

The safety and operation labels shown in this section are placed in important areas on the
machine to draw attention to potential safety hazards and service information. Should any of
these labels become unreadable or damaged, replacement labels can be odered from your dis-
tributor.

This is a multi-purpose label that reqi-
ures the operator to have maximum
eye, hearing, hand, and feet protec-
tion. Also, it highly recommends that
the operator reads the manual.

This label identifies the lift locations
on the machine. No other locations or
features on the machine are to be
used as lifting points. This will cause
damage to the machine.

This label identifies the tank used for retardant
spray agents (i.e., water-based retardants) only
on the machine.

NO OTHER

non-retardant

chemicals nor fuel is to be in this tank.

For gasoline-fueled machines, this label
identifies the tank used for

GASOLINE

fuel only in the machine.

NO OTHER

type of fuel is to be used in this tank.

«
...
27
28
29
30
31
...
»

Summary of Contents for PRO 430









































































































Reviews:

No comments

Related manuals for PRO 430

Brand: Bartell Pages: 41

Brand: ZIPPER MASCHINEN Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands