allen AMM12H13, Operations & Parts Manual

Page: 32 / 56

SECTION 3
SERVICE
068238 Page 32
SERVICE INSTRUCTIONS
• Never service or lubricate the unit engine while running.
• After servicing the unit, restore and fasten all guards, shields, and covers to their original positions.
• Never drain oil into the ground, into open streams, or down sewage drains.
ENGINE
• See engine owner´s manual maintenance schedule.
DRUM
• Wash the drum after every day’s usage.
• Pull the locking pin and tip the drum forward to drain water excess.
• Return drum to towing position and secure with locking pin before moving mixer.
LUBRICATION
• Grease all fittings daily. All mixers have 6 grease fittings, 4 pillow blocks and 2 drum trunnions. Two of the fittings are
located at each end of the mixer drum on the top of pillow blocks and trunnions. The two remaining grease fittings are
located under the engine shroud on the top of the intermediate shaft pillow blocks.
Item Maintenance
Each Every Every Every
Yearly
use 20 hours 50 hours
100
hours
Engine
Refer to engine operator/owner
manual
X X
Bearings Grease
X X
V-Belts Check for excessive wear
X X
Roller chain Check for excessive wear
X X
Hardware Check and tighten 1,2
X X X
Tires Check air pressure
X
Maintenance and Service Schedule
Scheduled Maintenance