manualshive.com logo in svg

allen 6500, Operations & Parts Manual

Share
Download
allen 6500 Operations & Parts Manual Download Page 7

   This manual provides information and procedures to safely operate and maintain the Allen Machine.

For your own safety and protection from personal injury, carefully read, understand, and observe the 
safety instructions described in this manual. Keep this manual or a copy of it with the machine at all 
times.
  
ALWAYS operate this machine in accordance with the instructions described in this manual. A well main-
tained piece of equipment will provide many years of trouble free operation.

This manual is divided into the following sections:

Complete any warranty requirements as specified by the engine manufacturer in their instructions found 
inside the manual box located on the back of the riding trowel operator’s seat.
  
Your engine and clutch is not manufactured by Allen Engineering Corporation, Inc, and therefore is not 
covered under Allen Engineering Corporation, Inc warranty.
 
Your engine manufacturer should be contacted if you wish to purchase a parts manual or a repair man-
ual for your engine. 

Refer to enclosed owners engine manual for complete O&M instructions. See your battery manufacturer 
for battery warranty.

SECTION 1

SAFETY

SECTION 2

OPERATIONS

SECTION 3

SERVICE

SECTION 4

PARTS

Information Contained 

In This Manual

038479

Page 7

Summary of Contents for 6500

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands