manualshive.com logo in svg

allen 6500, Operations & Parts Manual

Share
Download
allen 6500 Operations & Parts Manual Download Page 24

•  NEVER

 disconnect any emergency or safety devices. These devices are intended for opera-

tor safety. Disconnection of these devices can cause severe injury, bodily harm or even death. 
Disconnection of any of these devices will void all warranties.

•  NEVER

 stand on trowel during operation.

•  NEVER

 lubricate components or attempt service on a running machine.

•  NEVER

 place your feet or hands inside the guard rings while starting or operating this equipment.

•  ALWAYS

 keep the machine in proper running condition.

•  Fix damage to machine and replace any broken parts immediately.

•  ALWAYS

 store equipment properly when it is not being used. Equipment should be stored in a 

clean, dry location out of the reach of children and unauthorized personnel.

•  A safety manual for operating and maintenance personnel of concrete power trowels produced by 

the Association of Equipment Manufacturers (AEM) can be obtained for a fee by ordering through 
their website at 

www.aem.org

.

1.3 - General Safety, continued

SECTION 1

SAFETY

038479 

Page 24

Summary of Contents for 6500

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands