allen 070080, Safety & Operation Manual

Page: 54 / 62

Lifting a Buggy with a Crane
1. Make sure the bucket is completely empty.
2. Raise the bucket to a 55 degree angle with the frame as show below.
3. Attach three (3) chains or straps to the lifting cutouts in the frame as shown below.
4. Attach all three (3) chains or straps to the crane hook. Note: the crane hook must be equipped with a spring
loaded safety catch. The crane must be designed to lift at least 2000 LB.
5. Take the slack out of the chains or straps and adjust them so the buggy is level when lifted.
CRANE HAVING MAXIMUM LIFT CA
PACITY OF 2,000#
LIFT REAR OF
BUGGY USING 2
CUTOUTS AT
REAR CORNER OF
ENGINE COVER.
LIFT FRONT OF BUGGY BY RAISING B
ED TO 55 DEGREE ANGLE AND ATTA
CHING CHAIN OR STRAP TO LUG IN S
TEEL BASE SUPPORTING BUCKET.
EMPTY BUCKET AND RAISE TO THE
FULL UP POSITION (55° ANGLE) AND
ATTACHING CHAIN OR STRAP TH
ROUGH CUTOUT IN STEEL BASE
SUPPORTING BUCKET.
BUGGY MUST BE LEVEL AND SUPP
ORTED BY ALL THREE (3) POINTS
WHEN LIFTING WITH CRANE
CAUTION!
PINCH POINT
Lifting Procedures
SECTION 3
SERVICE
069583 Page 54