PENDING INFORMATION
Summary Data Of Sound And Vibration Testing
Operator Ear SPL
Seat Vibration Average
Left Hand
Vibration Average
Right Hand
Vibration Average
- dB (A)
- m/sec²
- m/sec²
- m/sec²
This information was acquired from sound and vibration analysis tests conducted at Allen Engineering Corporation test facilities.
069971
Page 6
GENERAL
INFORMATION
Sound & Vibration Testing
Sound Pressure Level Information:
Sound pressure is “A” weighted . Measured at the operators ear position while the ride-on trowel is operating at full throttle
on concrete in a manner most often experienced in “normal ” circumstances. Sound pressure may vary depending upon
the condition of the concrete. Hearing protection is always recommended.
Vibration Level Information:
The vibration level indicated is the maximum RMS (Root Mean Square) velocity value obtained at the handle grip while
operating the ride-on trowel on curing concrete in a manner most often experienced in “normal ” circumstances. Values
were obtained from all three axes of motion. The values shown represent the maximum RMS value from these measure-
ments.
