allenandroth.com
6
•
Any guard or other protective device removed for servicing the appliance
must be replaced prior to operation.
•
Clothing or other flammable materials should not be hung from the
appliance or placed on or near the appliance.
•Do not use the appliance if any part has been under water. Immediately
call a qualified technician to inspect the appliance and to replace any part
of the control system and any gas control that has been under water.
•
LP-gas supply cylinder to be used must be constructed and marked in
accordance with the specifications for LP-gas cylinders of the U.S.
Department of Transportation (DOT).
•
The cylinder supplies system must be arranged for
vapor withdrawal and the cylinder must include a collar
to protect the cylinder valve.
•
Use only 20 lb LP-Gas cylinders (Its dimension refer to
right image shown.).
•
Do not burn wood or any other materials in this appliance.
•
The appliance must be isolated from the gas supply
piping system by closing its individual manual shutoff valve
during any pressure testing of the gas supply piping system
at test pressure equal to or less than 1/2 PSI.
• A
nother cylinder may be acceptable for use with the appliance provided
they are compatible with the appliance retention means and accompanied by
illustration(s) depicting the cylinder mounted to the appliance utilizing the
cylinder retention means and the point of contact between the cylinder and
the retention means.
•
Properly place the hose out of pathways where people may trip over it or in
areas where there may be subject to accidental damage.
•
The burner must be replaced prior to the appliance being put into operation
if it is evident the burner is damaged. The replacement burner must be
the same as the part specified by manufacturer.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
30 minutes
Tool Required for Assembly (included): Wrench.
Tools Required for Assembly (not included): Phillips screwdriver, propane tank,
AA battery.
CAUTION
•
This appliance must be installed on a flat, stable surface, away from any
combustible materials or construction.
•
2 or more people are recommended for installation.
12.6 in.
18.11 in.
