background image

allenandroth.com

5

WARNING

• 

When the appliance is for connection to a fixed piping system, the installation 

  must conform with local codes, or in the absences of local codes with the 

  National Fuel Gas Code, ANSI Z223.1/NFPA54; International Fuel Gas Code; 

  Natural Gas and Propane Installation Code, CSA B149.1; or Propane Storage 

  and Handling Code, B149.2, as applicable. 

• 

The LP gas supply cylinder to be used must be:

  1-Constructed and marked in accordance with the U.S. Department of 

  Transportation (DOT)  Specifications for LP-Gas Cylinders, or the Standard 

  for Cylinders, Spheres and Tubes for transportation of Dangerous Goods 

  and Commission, CAN/CSA-B339, as applicable;

  2-Provided with a listed overfilling prevention device;

  3-Provided with a cylinder connection device compatible with the connection 

  for the appliance.

• 

Always place the appliance on a firm and level surface. 

• 

Solid fuels shall not be burned in this gas appliance. 

• 

Only use provided glass rocks with this appliance.

• 

The appliance shall be used only outdoors in a well-ventilated space and 

  shall not be used in a building, garage or any other enclosed area.

• 

When in use, keep the appliance area clear and at least 40-inches side 

  clearance from combustible materials, gasoline and other flammable 

  liquid and vapors. Do not use the appliance under overhead combustible 

  surfaces. Certain items or materials, when stored under the appliance or 

  nearby, will be subjected to radiant heat and could be damaged. 

• 

Open the door and inspect the hose assembly and burner prior to each use. 

  If there is evidence of excessive abrasion or wear or if the hose or burner is 

  damaged, it must be replaced by appropriate part from the manufacturer.

• 

Inspect the gas connections of the appliance prior to each use. Do not to 

  operate the unit if there is a gas leak. Have the appliance inspected annually 

  by a qualified service person. 

• 

The pressure regulator and hose assembly provided with the appliance must 

  be used.  The replacement part must be the same as the part specified by 

  manufacturer.

• 

Children and adults should be alerted to the hazards of high surface 

  temperatures and should stay away to avoid burns or prevent clothing 

  ignition. 

• 

Young children and pets should be carefully supervised when they are in 

  the area of the appliance.

Summary of Contents for 0733490



































Reviews: